|
ARCHIVAL JOURNALS
S. J. Lee, M. Goedert, M. T.
Matyska, E. M. Ghandehari, M. Vijay, and J. J. Pesek, "Polymethylhydrosiloxane (PMHS)
as a functional material for microfluidic chips," Journal of Micromechanics
and Microengineering, vol. 18, p. 025026, 2008.
S. J. Lee, J. C. Y. Chan, K. J.
Maung, E. Rezler, and N. Sundararajan, "Characterization of laterally deformable
elastomer membranes for microfluidics," Journal of Micromechanics and
Microengineering, vol. 17, pp. 843-851, 2007.
S. W. Cha, R. O'Hayre, S. J. Lee, Y. Saito, and F. B. Prinz, "Geometric Scale
Effect of Flow Channels on Performance of Fuel Cells", Journal of the
Electrochemical Society, Volume 151, 2004, A1856.
R.
O’Hayre, D. Braithwaite, W. Herman, S. J. Lee, T. Fabian, S. W. Cha, Y. Saito,
F. B. Prinz, "Development of Portable Fuel Cell Arrays with Printed-Circuit
Technology", Journal of Power Sources, Volume 124, 2003, pp.
459–472.
R. O’Hayre, T. Fabian, S. J. Lee, F. B. Prinz,
"Lateral Ionic Conduction in Planar Array Fuel Cells", Journal of
the Electrochemical Society, Volume 150, Number 4, April 2003, pp.
A430-A438.
S. J. Lee, A. Chang-Chien,
S. W. Cha, R. O'Hayre, Y. I. Park, Y. Saito, F. B. Prinz, “Design and
Fabrication of a Micro Fuel Cell Array with ‘Flip-Flop’ Interconnection”,
Journal of Power Sources, Volume 112, Issue 2, November 2002, pp. 410-418.
R. O'Hayre, S. J. Lee, S. W. Cha, F.
B. Prinz, "A Sharp Peak in the Performance of Sputtered Platinum Fuel Cells at
Ultra-Low Platinum Loading", Journal of Power Sources, Volume 109, 2002, pp.
483-498.
S. J. Lee, E. M.
Sachs, and M. J. Cima, "Layer Position Accuracy in Powder-Based Rapid
Prototyping", Rapid Prototyping Journal, Volume 1, Number 4, 1995,
pp. 24-37.
E. Sachs, M. Cima,
J. Cornie, D. Brancazio, J. Bredt, A. Curodeau, T. Fan, S. Khanuja, A. Lauder,
J. Lee, and S. Michaels, "Three-dimensional printing: The physics and
implications of additive manufacturing," CIRP Annals, vol. 42, pp. 257-260,
1993.
CONFERENCE PROCEEDINGS
D. Duraipandi, J. M. Heck, R. K.
Yee, and S. J. Lee, "A finite element study of geometric modifications to reduce
thermal mismatch curvature in wafer bonding," Proceedings of the ASME
International Mechanical Engineering Congress and Exposition, Seattle,
Washington, 2007, Paper IMECE2007-41453.
M. Vijay, E. Ghandehari, M. Goedert,
and S. J. Lee, "Fabrication process development and characterization of
polymethylhydrosiloxane (pmhs) for surface-modified microfluidic chips,"
Proceedings of the ASME International Mechanical Engineering Congress and
Exposition, Seattle, Washington, 2007, Paper IMECE2007-42575.
S. J. Lee, S. Gleixner, T. R. Hsu, D.
Parent, "Implementation of a MEMS Laboratory Course with Modular,
Multidisciplinary Team Projects", Proceedings of the ASEE Annual Meeting 2007,
Honolulu, HI, Paper 2007-1572.
K. J. Maung, J. Chan, S. J. Lee,
Experimental Studies on the Effects of Geometric Parameters in a Planar
Pneumatic Microvalve", Proceedings of the IEEE 16th Biennial
University/Government/Industry Microelectronics Symposium, San Jose, CA, June
2006.
S. J. Lee, S. Gleixner, T. R. Hsu, D.
Parent, "A Development Framework for Hands-On Laboratory Modules in
Microelectromechanical Systems (MEMS)", Proceedings of the ASEE Annual
Meeting 2006, Chicago, IL, Paper 2006-2445.
S. J. Lee, E. L. Allen, L. He, "A
Bottom-Up Approach to Interdisciplinary Engineering Education in
Nanotechnology", Materials Research Society Symposium Proceedings, Vol. 931,
Paper 0931-KK02-05, April 2006, San Francisco, CA.
S. J.
Lee, R. K. Yee, R. Kelley, R. Martin, A. Sadaka, and T. R. Hsu, "A Monolithic
Micro Four-Bar Mechanism with Flexure Hinges", ASME
International Mechanical Engineering Congress and RD&D Expo, November 13-19,
2004, Anaheim, California.
W. Shi and S. J. Lee, "Design
Concepts for Directed Exit Flow in Micro Fuel Cells", Proceedings of the ASME
Second International Conference on Fuel Cell Science, Engineering and
Technology, June 2004, Rochester NY, pp. 243-249.
S. J. Lee, W. Shi, P. Maciel, S. W.
Cha, "Top-Edge Profile Control for SU-8 Structural Photoresist", Proceedings of
the IEEE 15th Biennial University/Government/Industry Microelectronics Symposium,
Boise, Idaho, June 30 - July 2, 2003, pp. 389-390.
S. W. Cha, S. J. Lee, Y. I. Park, F.
B. Prinz, "Investigation of Transport Phenomena in Micro Flow Channels for
Miniature Fuel Cells", 2003 Proceeding of the 1st International Conference on
Fuel Cell Science, Engineering and Technology, Rochester, New York, April 21-23,
2003, Article 1171.
S. J. Lee, S. W. Cha, R. O'Hayre, A. Chang-Chien,
F. B. Prinz, "Miniature Fuel Cells with Non-Planar Interface by
Microfabrication", in Power Sources for the New Millennium, Proceedings Volume
2000-22, The Electrochemical Society Proceeding Series, Pennington, New Jersey,
October 2000.
S. J. Lee, S. W.
Cha, Y. C. Liu, R. O'Hayre, F. B. Prinz, "High Power-Density Polymer-Electrolyte
Fuel Cells by Microfabrication", in Micro Power Sources, K. Zaghib and S.
Surampudi (eds.), Proceedings Volume 2000-3, The Electrochemical Society
Proceeding Series, Pennington, New Jersey, May 2000.
E. M. Sachs, et al.
"3D Printing Surface Finish Improvement through On-Line Control", 5th
International Conference on Rapid Prototyping, Dayton, Ohio, 1994.
S. J. Lee, E. M.
Sachs, and M. J. Cima, "Powder Layer Position Accuracy in Powder-Based Rapid
Prototyping", Proceedings of the Solid Freeform Fabrication Symposium, Austin,
Texas, 1993.
PATENTS
US 7,341,800 (2008) by Sasahara, et
al., "Fuel cell" (based on laminate design with massively-parallel
channels)
US 7,235,323 (2007) by Kuriyama, et
al., "Fuel cell and method for making the same" (with integrated transducers)
US 7,179,500 (2007) by Park, et al.,
"Sub-micron electrolyte thin film on nanoporous substrate by oxidation of metal
film"
US 7,169,498 (2007) by Saito, et al.,
"Fuel cell and method for making the same" (for 3-D tubular fuel cell structure)
US 7,108,936 (2006) by Sasahara, et
al., "Fuel cell assembly" (based on solid-state bonding of microfabricated
substrates)
US 7,008,718 (2006) by Kubota, et
al., "Fuel cell assembly" (with microfabricated electrolyte wells)
US 6,991,868 (2006) by Lee, et al.,
"Fuel cell assembly" (with microfabricated planar interconnection)
US 6,835,488 (2004) by Sasahara, et
al., "Fuel cell with patterned electrolyte/electrode interface"
US 5,387,380 (1995) by Cima, et al.,
"Three-dimensional printing techniques"
POSTERS & ORAL PRESENTATIONS
E. M. Ghandehari, S. J. Lee, J. J. Pesek, M. Goedert, W. R. Chung,
"Plasma-Etch Modification of Polymethylhydrosiloxane (PMHS) for Enhanced Surface
Area in Microfluidic Devices", poster CC4.8 at Materials Research Society Spring
Meeting, March 25-27, 2008, San Francisco, California, USA.
S. J. Lee, "Reducing Thermal Mismatch
Curvature in Wafer-Level Packaging", presented at the International
Microelectronics and Packaging Society, Northern California chapter meeting,
June 6, 2007, Sunnyvale, California, USA.
J. J. Pesek, M. T. Matyska, S. J.
Lee, M. Goedert, "Microfluidic Separation Devices for Biological and
Pharmaceutical Analyses Based on a Modifiable, Optically Transparent and
Nonadsorbent Polymeric Material", presented at MSB 2007: 21st International
Symposium on Microscale Bioseparations, January 17, 2007, Vancouver, British Columbia, Canada.
S. J. Lee, A. Goli, J. Heck, "A
Geometric Approach to Reducing Thermal Mismatch Curvature in Wafer Bonding",
presented at MEMS Packaging Trends: From Production to
Market, Microelectronics Packaging and Test Engineering Council (MEPTEC), May
18, 2006, San José, California, USA.
S. J. Lee, C. Y. Chan, N.
Sundararajan, "Characterization of In-Plane Pneumatically-Actuated PDMS
Membranes for Microfluidics", presented at MEMS & BioMEMS 2005 - 7th
International Conference, November 9, 2005, San Francisco, California, USA.
S. Shirke, M. Goedert, S. Mantha, S.
J. Lee, "Fabrication of Microchannels for Planar Capillary Electrokinetic
Chromatography (PCEC)", poster TP097 at LabAutomation 2005, January 30 –
February 3, 2005, San Jose, California, USA.
S. W. Cha, S. J. Lee, Y. I. Park, Y. Saito, F.
B. Prinz, "Geometric Scale Effect of Micro Flow Channels in Miniature Fuel
Cells", presented at 203rd Meeting of The
Electrochemical Society, Paris, France, April 29 - May 3, 2003.
S. W. Cha, S. J. Lee, R. O'Hayre, Y.
I. Park, Y. Saito, F. B. Prinz, "Micro Fuel Cell Based on Thick Photoresist",
Electrochemical Society Meeting Abstracts, Volume 2002-1, May 2002.
S. J. Lee, S.W. Cha, A.
Chang-Chien, R. O'Hayre, F. B. Prinz, “Factorial
Design Study of Miniature Fuel Cells with Micromachined
Silicon Flow Structures”, Electrochemical Society Meeting Abstracts, Volume
2001-2, September 2001.
A. Chang-Chien,
S.W. Cha, S.-J. Lee, R. O'Hayre, F. Prinz, "Planar Interconnection of Multiple
Polymer Electrolyte Membrane Fuel Cells by Microfabrication",
Electrochemical Society
Meeting Abstracts, Volume 2001-2, September
2001.
INDUSTRY/GOVERNMENT PUBLICATIONS
S. K. Kang, S. J. Lee, F. B. Prinz, "Size Does
Matter: the Pros and Cons of Miniaturization", ABB Review, February 2001,
pp. 54-62.
A. Goder, E.
Gantvarg, J. Lee, I. Perlov, "Carousel Wafer Transfer System", Applied Materials
Engineering and Technology Conference, San Jose, California, 1998.
E. M. Sachs, et al.,
"Micro-Constructive Manufacturing by Three Dimensional Printing", Proceedings of
the 1993 NSF Design and Manufacturing Systems Conference, Charlotte, North
Carolina, 1993.
|