Reading Assignment 1: DOM Ch2 Sections 1-5, 9-12
Reading Assignment 2: DOM Ch3 Sections 1-5
Reading Assignment 3: DOM Ch3 Sections 9
2-position Graphical Synthesis lecture notes.pdf
3-position Graphical Synthesis lecture notes.pdf
HW set 4 problem 4-10a solution
HW set 4 problem 4-12c solution
Added Office hours for Friday 3/6 from 9 to 9:30am, 2 to 3pm for Midterm I on Monday
ME154_Design_Flowchart.pdf and ME154 Design Process Steps.pdf
Reading Assignment 4: DOM Ch4 Sections 1-7, 9-11
Reading Assignment 5: DOM Ch5 Sections 1-4, 6, 10
Reading Assignment 6: DOM Ch6 Sections 1, 7-9
Reading Assignment 7: DOM Ch7 Sections 1-5
Reading Assignment 7: DOM Ch11 Sections 1-7
HW Set 5 Assignment: DOM text Ch5 problem 18 and Ch6 problem 7(row a)
Hint on HW set 5 prob 5-18: Assuming Beta-2 = 30 to 50 degrees, Beta-3 = 70 to 90 degrees, gamma-2 = 15 to 25 degrees, gamma-3 = 40 to 60 degrees
HW set 5 problems 5-18 & 6-7a solutions
HW Set 6 Assignment: DOM text Ch 7 problem 7(row a) and Ch 11 problem 3(row a), due April 1
Reading Assignment 8: Machine Design (MD) text Ch4 Sections 1-9
Example problem 11-5a solution
Tommorrow (3/31) is campus holiday and Office hours will not be held
HW set 6 problem 7-7a solution
HW set 6 problem 11-3a solution
HW set 7 MD problems 4-1 & 4-6 solutions
HW set 7 MD problem 4-41 solution
ME 154 Design Project Report guidelines
HW set 8 MD problems 4-49a & 4-52a solutions
HW set 8 MD problem 4-53 solution
HW Set 9 Assignment: problem #1 -- MD text Ch4 problem 27 (ignore the deflection calculation at the end of the roll) and the press-fit problem #2 below, due 4/27 (Monday)
HW set 9 problem #2 also due 4/27
HW Set 10 Assignment: MD text Ch5 problem 5-3, 5-21, Ch6 problem 6-5 do Table P6-3 row 1 only due 5/6 (Wednesday)
HW set 9 MD problem 4-27 solution
In-class Fatigue Example Diagram
Midterm II problem 3 solutions